Functional swords category B

Shippment 2 weeks

Ropper swords

Torino Functional Rapier

BT7407

€545.58

Functional rapier sword for fencing from the 17th century. High quality carbon steel blade with excellent balance. Total length 115 cm. length of the blade 93 cm. weight 1.05 kg. Width at guard 1,90 cm. at tip 1,02 cm. Thickness at guard 0,64cm. at tip 0,25 cm.

Shippment 2 weeks

Ropper swords

Taza Cup-Hilt Rapier

BT7412

€684.18

Functional cup-hilt rapier sword with a sharp blade. Made of carbon steel with a total length of 117,5 cm. 87,2 cm. blade and 936 gr. weight. Blade width 1,9 cm/1 cm. blade thickness 6.4 mm/2.5 mm, including leather scabbard.

Shippment 2 weeks

Viking Swords

One-Handed Combat Viking Sword

BT7276

€197.96

Hand-crafted replica of a functional Viking single-handed sword from the 11th century. The high-quality spring steel blade is oil-tempered up to 48-50° Rockwell. Includes leather-wrapped wooden scabbard with two straps with buckles. The grip is covered with leather. It is not sharpened and the point is rounded. Blade material: EN45 steel, heat treated -...

Shippment 2 weeks

Viking Swords

Practical Viking Sword, Blunt

BT7363

€241.98

This very affordable piece features authentic hilt styling, with a fully tempered un-edged and un-pointed blade, and is made to withstand rugged use while providing the level of safety required by many of today´s re-enactment societies.

Shippment 2 weeks

Viking Swords

Functional Viking Sword 10Th Century

BT7364

€252.96

Functional Viking Sword made of EN45 carbon steel. It is not sharpened and the tip is rounded. It supports combat with other swords of the same category but may be damaged if used with category A swords. Includes wooden scabbard covered with leather.

Shippment 2 weeks

Foils

Practical Cup Hilt Rapier

BT7396

€444.38

The rapier blade is similar in design to the practical blades for the swept-hilts but the length of the tang is adapted to the cup-hilt.

English Two Hand Sword by Windlass in our Medieval Zetan Store in the Historical swords category

Check availability

Historical swords

English Two Hand Sword

Windlass

MW2595

€548.00

This huge sword is a replica of the number IV-1787 of the Royal Armories of England. Although large, it is perfectly balanced for use with two hands. The long knob is made of wood covered in leather. It is decorated with pieces of steel that make this sword a truly impressive weapon. Includes pod. Total length: 146 cm Sheet: 112 cm Length, 5 cm Width,...

Envío en 2 Semanas

Viking Swords

Viking Sword with Scabbard S.XI Practices

BT7567

€175.96

The battle-ready one-handed sword we offer is a replica of an 11th century Viking sword. This type of sword (Oakeshott Type X) represents the transition from the Viking sword to the medieval or knightly sword, and the many surviving examples attest to its popularity both in the late Viking Age and in the High Middle Ages.

Envío en 2 Semanas

Functional swords category B

Espada Entrenamiento HEMA Kingston Arms

BT7568

€396.73

Functional training sword. This sword is NOT sharpened and has a rounded tip. Main features:- Blade forged by hand in 9260 steel, 3.25 mm thick.- Designed by Angus Trim- Wooden scabbard covered in leather. Details:- Total length: approx. 114 cm - Blade length: approx. 88.5 cm - Handle length: approx. 20 cm - Weight without scabbard: approx. 1250 grams.

Envío Inmediato

Viking Swords

Hurum Viking Sword for Training

BT7569

€142.54

Design of the classic Viking swords, the Hurum Viking sword offers a wide blade made of EN45 steel and has a pronounced groove, which gives the sword great elasticity and lightness at the same time. The edges are not sharp and the tip is rounded. The short hawks and the pommel are made of steel. Details: - Rockwell hardness: approx. 48-50 HRC - Total...

Envío en 2 Semanas

Functional swords category B

Tourney One-Handed Sword

BT7572

€300.21

Kingston Arms Tourney medieval sword of one hand. Main features: - Thick, blunt blade made of 9260 spring steel - Very resistant - With scabbard. Details: - Total length: approx. 93.98 cm- Blade length: approx. 76.2 cm - Handle length: approx. 11.43 cm- Weight: approx. 1420 gr.

Out-of-Stock

Viking Swords

Ballinderry Viking Sword with Scabbard and Belt

BT7573

€329.98

Functional Viking sword from Ulfberht.Battle-ready sword Category: SK-B- Blade material: high carbon steel 5160, tempered- Rockwell hardness: approx. 48-52 HRC- Handle material: leather-wrapped wood, pommel and guard in steel- Total length: 94 cm- Blade length: 79 cm - Handle length: 15 cm - Width of the blade in the guard: 5 cm - Sheet thickness: approx....

View

Envío en 2 Semanas

Viking Swords

Viking Sword S.X Pommel of 5 Lobes

BT7577

€208.96

Beautiful functional reconstruction of a 10th century Viking sword, based on archaeological finds in England. As early as the eighth century, isolated groups of Vikings descended sporadically on British shores in search of easy booty. However, starting in the 9th century, the Scandinavians changed their strategy and began to conquer land and settle in...

Envío en 2 Semanas

Viking Swords

Torshov viking sword with scabbard

BT7579

€197.96

This functional Viking sword is based on a find in Torshov (Gjerdrum) in southern Norway. The hilt is classified as type H, which was very common between 800 and 950 AD.

Envío en 2 Semanas

Functional swords category B

Late Medieval Oakeshott Sword with Belt and Scabbard

BT7580

€285.98

This beautiful functional Battle Ready one handed sword is a reproduction of a remarkably well preserved 14th century original. It was classified as Type XIV under Oakeshott's typology and is on display for people to admire at the Metropolitan Museum in New York. The 2mm thick blunt edges and rounded blade tip make this late medieval weapons sword ideal...

Out-of-Stock

Functional swords category B

Oakeshott XII Sword with Scabbard and Belt

BT7581

€285.98

Functional one-handed sword is based on a sword assigned to Konrad von Thüringen, Grand Master of the Teutonic Knights from 1239 to 1240 AD. -Battle Ready Sword Category B - Blade material: hardened steel - Rockwell hardness: approx. 48-50HRC - Handle material: wood, brass bands, steel pommel and guard - Total length: approx. 100cm - Blade length: approx....

View

Envío en 2 Semanas

Functional swords category B

Late Medieval Sword with Scabbard S. XV

BT7587

€329.98

This replica features a hardened steel blade that has been tempered to a Rockwell hardness of approx. 49-51 HRC. The blade tapers to the point and has a diamond cross section. It is full tang and riveted to the pommel. The crossguard is forged from steel and the leather-wrapped wooden grip is topped with a large fishtail pommel. The sword's handsome...

Envío en 2 Semanas

Functional swords category B

Royal Armories Functional Medieval Sword

BT7588

€307.98

Functional one-handed sword with hardened steel blade that has been tempered to a Rockwell hardness of approx. 49-51 HRC. The steel crossguard has folded ends and the leather-wrapped wooden grip is topped with a strong steel disc-shaped pommel. The beautiful scabbard for the sword is made of leather and comes complete with a belt. The edges are blunt 2mm...

Shipping in 2 weeks

Viking Swords

Viking Training Sword S-X

BT7601

€98.98

Functional Viking sword for training with a high-quality carbon steel blade, which is forged in one piece to the pommel and riveted to it. The edge of the blade is blunt and the tip rounded. The guard and pommel are made of hand-forged carbon steel. Total length: 80 cm. Handle length: 15 cm. Blade length: approx. 65 cm. Max blade width: 4 cm. Cutting...

Check availability

Historical swords

King Henry V Sword

MW2619

€396.00

Functional replica of Henry V's sword, perfectly balanced and sharp edge. Includes high quality leather scabbard. The pommel is hollow like the original and is appropriately decorated in gold, and has red enameled crosses on each side. Total length: 86 cm. Blade length: 68 cm. Blade width: 5 cm. Blade thickness: 0.47 cm. Weight: 1,080 g. Material: 1065...

Medieval one-handed sword ready for battle

Medieval one-handed sword ready for battle 2

Shipping in 2 weeks

Functional swords category B

Oakeshott XIV One-Handed Sword

BT7610

€259.99

Oakeshott type XIV medieval one-handed sword with copper pommel. Ready for battle, for practice and blunt edges. Blade material: spring steel, tempered - Rockwell hardness: 48-50 HRC. - Handle material: leather-covered wood, copper knob, steel protection. - Total length: 87 cm. - Blade length: 68.5 cm. - Handle length: approx. 18.5 cm (grip 12.5 cm). -...

Shipping in 2 weeks

Functional swords category B

Functional Knights Templar Sword

BT7611

€279.99

Functional Templar sword with 2mm blunt edges and ready for battle. Blade material: spring steel, tempered - Rockwell hardness: 48-50 HRC. - Handle material: wood covered in leather. - Total length: 109 cm. - Blade length: 89 cm. - Handle length: 15.7 cm (grip 11.2 cm). - Width of the blade on the guard: 5 cm. - Blade thickness: approx. 4.5 mm, Blade tip:...

One Handed Functional Sword - Royal Armories -

One Handed Functional Sword - Royal Armories - 2

Shipping in 2 weeks

Functional swords category B

One Handed Functional Sword - Royal Armories -

BT7612

€279.99

This one-handed sword is a reproduction of a late medieval sword dated around 1310 AD. The original was classified as Type XVIIIa according to Oakeshott's typology and is on display at the Royal Armouries. It has blunt edges and is made for forceful practice. Blade material: spring steel, tempered. - Rockwell hardness: approx. 49-51 HRC. - Handle...

Shipping in 2 weeks

Functional swords category B

Practical Medieval Bastard Sword

BT7613

€279.99

Hand and a half bastard sword with leather scabbard and ready for battle and forceful practice. Total length: approx. 114 cm. - Blade material: tempered steel. - Handle length: approx. 22cm. - Width of the blade in the protection: 5 cm. - Blade thickness: approx. 4.8mm - Rockwell hardness: approx. 48-50 HRC. - Handle material: wood covered in leather. -...

Showing 25-48 of 58 item(s)